BendPak GP-9F 9,000lb 4 Post Lift Package

GP-9F 9,000lb 4 Post Lift Package by BendPak

Are you tired of squeezing your pride and joy into a garage that’s one oil pan away from being a junkyard? Do you dream of lifting your ride like it’s a feather and transforming your cluttered garage into a showroom of mechanical glory? Enter the BendPak GP-9F 9,000lb 4-Post Lift—a masterpiece of engineering that doesn’t just lift cars; it elevates your entire existence. With features like a 9,000-lb lifting capacity, slim, boxed-steel columns, lightweight aluminum approach ramps, and multiple locking positions every 4 inches, this lift is the answer to everything you never knew you desperately needed.

With heavy-duty aircraft-grade wire ropes rated at 14,000lbs each, a 45-second rise time, and runways low enough to accommodate even the most delicate low-clearance vehicles, the GP-9F doesn’t just lift—it ascends to the heavens. Whether you’re performing maintenance, storing your classic, or showing off to your neighbors who are still fumbling with floor jacks, this lift is your ticket to garage greatness. And yes, it even comes with drip trays, because your garage deserves to stay as clean as your conscience after buying this beauty.

4 Post Lift GP-9F Specification

Capacity

• Lifting Capacity: 9,000 lbs. (4,082 kg)
• Max Capacity (Front/Rear Axle): 4,500 lbs. (2,041 kg)

Rise

• Min. Runway Height: 5” (127 mm)
• Max. Rise: 70” (1,778 mm)
• Max. Lifting Height: 75” (1,905 mm)
• Time to Full Rise: 45 seconds

Outside Dimensions

• Overall Width: 114.5” (2,908 mm)
• Outside Length: 176.5” (4,483 mm)
• Overall Length: 203” (5,156 mm)
• Height of Columns: 89” (2,261 mm)

Inside Dimensions

• Width Between Columns: 98” (2,489 mm)
• Drive-Thru Clearance: 88” (2,235 mm)

Runways

• Runway Width: 18.75” (476 mm)
• Length of Runways: 161.25” (4,096 mm)
• Width Between Runways: 35” (889 mm)

Locking

• Locking Positions: 13
• Lock Spacing: Every 4” (102 mm)

Power Unit

• Motor Options:
  • Standard: 110VAC, 50-60Hz, 1Ph, 20A
  • Optional: 208-230VAC, 50-60Hz, 1Ph, 25A
• Noise Level: 45 dB

Shipping

• Weight: 2,224 lbs. (1,008.8 kg)
• Shipping Dimensions: 166” x 22” x 30” (4,203 mm x 558 mm x 762 mm)

Included Accessories

• Caster Kit (mobility)
• Aluminum Approach Ramps (lightweight and durable)
• Drip Trays (polyethylene)
• Jack Tray (for bottle jacks)

• Warranty
  5 Year - Lift Structure
  2 year - Hydraulic Unit & Power Unit
  1 Year - Electrical and Operating Components
  *Reasonable labor costs covered for first 12 months

GP-9F 9,000lb 4 Post Lift Special Features

• Design & Build

  • Free-standing or floor-fastened installation options.
  • Structural 4.75” x 4.75” boxed-steel columns for superior strength.
  • 12” x 12” baseplates made of 5/8” thick steel for stability.
  • Durable powder coat finish for long-lasting protection.
  • Welded-steel runways with utility rails for jack trays and drip trays.
  • Low-profile runways (5” high) for accommodating low ride-height vehicles.
  • 5/8” thick steel top caps and hardened steel collars on sheave axles.

• Safety Features

  • Manual dead bolt locks machined into the columns for reliability.
  • 3/4” thick spring-loaded safety locks for automatic and secure engagement.
  • 13 positive locking positions spaced every 4 inches.
  • Secondary slack-cable lock system for instant back-up safety.
  • Full-perimeter exterior steel sleeves ensure positive contact and containment.
  • Hardened steel lock linkages with carbon steel rod ends for reduced flex and twist.
  • Built-in flow restriction prevents free-fall in the hydraulic cylinder.

• Cables & Components

  • Stainless steel lifting cables rated at 14,000 lbs. each.
  • Cable keepers to keep cables securely attached to sheaves.
  • Pre-assembled cables for simplified installation.
  • Precision, reinforced rod ends with corrosion-resistant spherical bearings.

• Accessories (Included)

  • Caster kit for easy mobility.
  • Lightweight aluminum approach ramps (36” gusseted for no flex).
  • Polyethylene drip trays to capture fluids.
  • Sturdy jack tray for use with bottle jacks.
  • Hardened steel tire stops (forward and rear) with pull-out capability.

• Operation & Control

  • Electric/hydraulic power system with single hydraulic cylinder under runway.
  • Simple, ergonomically-placed operator controls for ease of use.
  • Runway bolts (3/4”) for secure attachment and added safety.

• Optional Add-ons

  • Full-length aluminum platforms for storing ATVs, motorcycles, jet skis, or lawnmowers.

• Mobility & Surface Protection

  • Heavy-duty poly caster wheels (non-marring) to prevent floor damage.
  • Pull-out tire stops allow for drive-through capability.
    

BendPak HD-7500PBX Documentation

  BendPak GP-9F Installation and Operations Manual

  BendPak GP-9F Product Brochure

Warehouse Pickup Locations: $500 Pickup Discount Available - Contact us for more information!

• Santa Paula, CA 93060
• Theodore, AL 36582