BendPak GP-9XLT 9,000lb 4 Post Lift - Extended Length

GP-9XLT 9,000lb 4 Post Lift by BendPak

Struggling with an overcrowded garage and the constant risk of injury while working under your car? It’s time to face the facts—your current setup just isn’t cutting it anymore. Whether you're wrestling with a low-clearance vehicle or trying to work on something heavier, your current lift (or lack thereof) isn’t doing you any favors. But who’s got time for low-quality gear when you could be stepping up your game with the best in the biz?

Here’s where the BendPak GP-9F 9,000lb 4-Post Lift steps in. No more struggling with flimsy lifts that don’t get the job done or wasting time on unsafe setups. This 9,000-lb capacity behemoth features a low-profile design, 16 locking positions, and a rapid 45-second rise time, all backed by superior safety features like aircraft-grade cables rated at 14,000 lbs each. It’s time to stop putting off what you’ve been meaning to do and finally give your garage the upgrade it deserves. With a 5-year warranty and all the right accessories, the GP-9F is the answer to your woes. Get yours today and start lifting with confidence!

4 Post Lift GP-9F Specification

• Capacity:
  • Lifting Capacity: 9,000 lbs. (4,082 kg)
  • Max Capacity (Front Axle): 4,500 lbs. (2,041 kg)
  • Max Capacity (Rear Axle): 4,500 lbs. (2,041 kg)
• Rise:
  • Min. Runway Height: 5" (127 mm)
  • Max. Rise: 84.5" (2,146 mm)
  • Max. Lifting Height: 89.5" (2,273 mm)
  • Time to Full Rise: 55 seconds
• Outside Dimensions:
  • Overall Width: 113" (2,870 mm)
  • Outside Length: 201" (5,105 mm)
  • Overall Length: 234" (5,944 mm)
  • Height of Columns: 105" (2,667 mm)
• Inside Dimensions:
  • Width Between Columns: 98" (2,489 mm)
  • Drive-Thru Clearance: 86" (2,184 mm)
• Runways:
  • Runway Width: 19" (483 mm)
  • Length of Runways: 189" (4,801 mm)
  • Width Between Runways: 37.5" (953 mm)
  • Runway Centerline: 56.5" (1,435 mm)
  • Outside Edge of Runways: 75.5" (1,918 mm)
• Minimum Wheelbase:
  • Rated Capacity: 135" (3,429 mm)
  • 75% Capacity: 115" (2,921 mm)
  • 50% Capacity: 95" (2,413 mm)
  • 25% Capacity: 80" (2,032 mm)
• Locking:
  • Locking Positions: 16
  • Lock Spacing: Every 4" (102 mm)
• Power Unit:
  • Motor: 110-VAC / 50-60 Hz / 1 Ph / 20-amp
  • Noise: 45 dB

• Warranty
  5 Year - Lift Structure
  2 year - Hydraulic Unit & Power Unit
  1 Year - Electrical and Operating Components
  *Reasonable labor costs covered for first 12 months

GP-9F 9,000lb 4 Post Lift Special Features

• Extended length (24" longer) and column height (12" taller) for long-wheelbase and taller vehicles
• Designed for both commercial and residential use
• 16 locking positions spaced every 4 inches for flexible vehicle height adjustments
• Heavy-duty aircraft wire ropes rated at 14,000 lbs. each for added safety
• Automatic slack-cable lock system for instant backup safety
• Durable 4.75" x 4.75" boxed-steel columns with full-perimeter sleeve containment
• 5/8" thick, 12" x 12" baseplates for superior stability and strength
• Welded and boxed steel runways for enhanced load-bearing performance
• Includes essential accessories: caster kit, drip trays, jack tray, aluminum approach ramps, hardened steel tire stops, and wheel chocks
• Low-profile runways (5") to accommodate low ride-height vehicles
• Built-in hydraulic cylinder flow restriction to prevent free-fall
• Simple, ergonomic controls for precision operation
• Heavy-duty non-marring caster wheels protect floor surfaces
• Optional full-length aluminum platforms for additional vehicle storage versatility
• Durable powder-coated finish for long-lasting wear resistance
• Industry-leading 5-year BendPak warranty and superior customer support

BendPak HD-9XLT Documentation

  BendPak GP-9XLT Installation and Operations Manual

  BendPak GP-9XLT Product Brochure

Warehouse Pickup Locations: $500 Pickup Discount Available - Contact us for more information!

• Santa Paula, CA 93060
• Theodore, AL 36582