Can you put a car lift in a regular garage?Yes—if your ceiling height and concrete slab meet the specs. Two-post lifts usually need 10–12 feet of clearance. Many four-post lifts can fit in garages with 8–9 feet ceilings if used mainly for storage with lower vehicles.How much does it cost to put a lift in my garage?On average, installation labor runs about $800–$2,500. You may also need electrical work ($200–$600) and sometimes permits. The lift itself varies by brand and capacity.How thick should a garage floor be for a car lift?Most lifts require 4–6 inches of strong, uncracked concrete at around 3,500–4,000 PSI. Avoid seams and control joints under the posts and always follow the manufacturer’s anchor specs.What are the requirements for a car lift in a garage?You’ll need proper ceiling height, a solid concrete slab, and the right power source. Most two-posts run on 220V single-phase, while many four-posts can plug into 110V. Also check door tracks, openers, lights, or any overhead obstructions.Where should a car lift be placed in a garage?The best spot is centered in a bay with about 30–36 inches of working space on each side, plus clearance at the front and back. Keep posts off slab joints and make sure the garage door clears the vehicle.

Question

Accepted Answer

Can you put a car lift in a regular garage?Yes—if your ceiling height and concrete slab meet the specs. Two-post lifts usually need 10–12 feet of clearance. Many four-post lifts can fit in garages with 8–9 feet ceilings if used mainly for storage with lower vehicles.How much does it cost to put a lift in my garage?On average, installation labor runs about $800–$2,500. You may also need electrical work ($200–$600) and sometimes permits. The lift itself varies by brand and capacity.How thick should a garage floor be for a car lift?Most lifts require 4–6 inches of strong, uncracked concrete at around 3,500–4,000 PSI. Avoid seams and control joints under the posts and always follow the manufacturer’s anchor specs.What are the requirements for a car lift in a garage?You’ll need proper ceiling height, a solid concrete slab, and the right power source. Most two-posts run on 220V single-phase, while many four-posts can plug into 110V. Also check door tracks, openers, lights, or any overhead obstructions.Where should a car lift be placed in a garage?The best spot is centered in a bay with about 30–36 inches of working space on each side, plus clearance at the front and back. Keep posts off slab joints and make sure the garage door clears the vehicle.

Car Lifts for Garage

Check out other Garage Car Lift options:

Car Lifts for Garage FAQs

Can you put a car lift in a regular garage?

How much does it cost to put a lift in my garage?

How thick should a garage floor be for a car lift?

What are the requirements for a car lift in a garage?

Where should a car lift be placed in a garage?